كيفية صيانة المكونات المهمة في عملية اللحام بالليزر؟ (2).

النظام الكهربائي

فحص قواطع الدائرة الكهربائية: تأكد من أن قاطع الدائرة الكهربائية الرئيسي وقواطع إمداد الطاقة الفردية، بما في ذلك مفتاح الإيقاف في حالات الطوارئ، تستجيب بسرعة وفعالية.

التحقق من توصيلات الطاقة: تأكد من صحة توصيلات الطاقة الخاصة بجهاز الليزر.

التأكد من السعة المناسبة: تحقق من أن قواطع الدائرة الرئيسية والفرعية (للوحدة الرئيسية، وجهاز الليزر، وضاغط الهواء، وما إلى ذلك) تستوفي متطلبات السعة المحددة.

التحقق من قياس السلك: تأكد من أن قطر أسلاك التيار الكهربائي والتأريض والسلك المحايد يتوافق مع مواصفات الجهاز ولا يقل عن المطلوب.

فحص التوصيلات الأرضية: تأكد من أن التوصيلات الأرضية لأسلاك مصدر الطاقة محكمة ومثبتة بشكل صحيح.

فحص أطراف التوصيل الكهربائية: تحقق من موثوقية وأمان جميع أطراف توصيل الأسلاك عالية الجهد، لا سيما عند نقاط الدخول والخروج لمحول الطاقة. تأكد من أن جميع القوابس والمآخذ موصولة بإحكام.

مراقبة استقرار الجهد الكهربائي: تحقق بانتظام من استقرار جهد الإمداد الكهربائي لضمان استمرارية التشغيل.

الحفاظ على النظافة والتهوية: حافظ على نظافة خزانة الأجهزة الكهربائية الخاصة بجهاز اللحام بالليزر، وترتيبها، وتهويتها جيدًا.

فحص سلامة وأمان الأسلاك الكهربائية: قم بفحص جميع الأسلاك الكهربائية بانتظام للتأكد من سلامتها وأمانها، وذلك لمنع حدوث أي مخاطر كهربائية.

Optical System

Precautions

Avoid Direct Contact: Do not touch the surfaces of optical lenses (such as protective lenses and focusing lenses) directly, as this can scratch the mirror surface.

Cleaning Restrictions: Never clean optical lenses with water, detergents, or similar substances, as they can damage the special coatings on the lens surface.

Proper Storage Conditions: Do not store lenses in dark, damp places, as this can cause aging of the lens surface.

Keep Lenses Clean: Lenses must be kept clean. Dust, dirt, or moisture can absorb laser energy and damage the coatings, affecting laser beam quality or even preventing the beam from generating.

Timely Replacement: Replace lenses promptly if they are damaged.

Care During Installation: When installing or replacing protective or focusing lenses, apply minimal pressure to avoid deforming the lens, which can negatively impact beam quality.

Lens Storage

Proper Storage: Ensure that optical lenses are stored correctly to maintain their quality.

Temperature Control: Store lenses in environments with temperatures between 10–30°C. Avoid placing them in freezers or similar conditions to prevent condensation, which can damage the lenses. Temperatures above 30°C can also affect the lens coatings.

Secure Environment: Keep lenses in a box and in a stable, vibration-free environment to prevent deformation that could impair their performance.

مصدر الليزر

Power Line Inspection: Regularly check the power lines and ensure that the laser source is grounded. Use a multimeter to verify continuity between the laser housing and the ground (PE yellow-green wire) before powering on.

Control Line Compliance: Ensure that all control lines and voltages meet the manufacturer’s technical specifications. Non-compliance can lead to irreversible damage.

Fiber Protection: Handle fiber optics with care. Avoid bending or putting stress on the fibers to prevent damage.

Lens Cleaning: Protect the optical output head from dust. If cleaning is necessary, use 99.9% pure ethanol and lint-free swabs to avoid contamination.

Monitor System Functionality: During operation, continuously check the water, gas, and electrical systems for normal functionality. If any issues arise, power off the system immediately to diagnose the problem.

Fault Documentation: If any faults occur, document the time, symptoms, and operational status of the system before troubleshooting the cause.

Cooling System Maintenance: For long-term use, regularly clean the cooling water lines and keep the laser source clean. Replace the cooling water in the chiller periodically to maintain optimal performance.